Philips MCD170/98 Troubleshooting, Remote control does not work, Replace or clean the disc

Page 30

12 Troubleshooting

Caution

Never remove the casing of this DVD Micro Theater.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this DVD Micro Theater, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.Philips.com/support). When you contact Philips, ensure that your DVD Micro Theater is nearby and the model number and serial number are available.

No power

Ensure that the AC power plug of the DVD Micro Theater is connected properly.

Ensure that there is power at the AC outlet.

As a power-saving feature, the DVD Micro Theater switches to standby automatically 15 minutes after disc/USB play reaches the end and no control is operated.

No sound or poor sound

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connected correctly.

Check if the stripped speaker wires are clamped.

Left and right sound outputs reversed

Check the speaker connections and location.

No response from the DVD Micro Theater

Disconnect and reconnect the AC power plug, then turn on the system again.

Remote control does not work

Before pressing any function button, first select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the DVD Micro Theater.

Insert the battery with its polarities (+/– signs) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the DVD Micro Theater.

No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

Use a finalized CD or correct format disc.

The DVD player does not respond when buttons are pressed.

Disconnect the power plug from the jack, and insert again.

No image is output when a function is selected.

Make sure the component is connected correctly.

Press the correct function button for the input source.

Recording or playback cannot be made

Clean deck parts.

Use only NORMAL tape.

Apply a piece of adhesive tape over the missing tab space.

The language for the sound or subtitle cannot be changed during DVD playback.

Multi-language sound or subtitle is not recorded on the DVD.

Changing the language for the sound or subtitle is prohibited on the DVD.

E n g l i s h

EN 31

Image 30
Contents ZH-TW 使用手冊 Register your product and get support at MCD170/98Contents Safety Hearing safety Know these safety symbolsListen at a moderate volume Be careful not to adjust the volume as your hearing adapts Environmental informationThis DVD Micro Theater includes this label You can play DVDs with the following region code IntroductionWhat’s in the box Asia Pacific, Taiwan, Korea Australia, New ZealandOverview of the main unit Overview of the remote Control Zoom in or out a picture/video image on the TV screen Connect speakers ConnectPreparations Connect audio cablesConnect video cables Option 3 connect component video cables Connect powerConnect the MW antenna Connect the supplied MW antenna to the MW Aerial socketGet started Prepare the remote controlAuto install radio stations Always follow the instructions in this chapter in sequenceSet clock Set up the TVSwitch to standby Turn onPlay Play discsView pictures Play from USB devicesPlay DivX video Play tapePlay control Play optionsChange camera angle ProgramReview program Select an audio languageTune to a radio station Select a preset radio stationListen to radio Program radio stations manuallyRecord a section of a disc to tape RecordAuto record from CD to tape Record from radio to tapeSelect a preset sound effect Adjust soundAdjust volume level Enhance bassAdjust settings System settingsPlayback settings Select TV system Restrict DVD playSelect video signal Video settingsChange parental control password View DivX VOD registration codeSelect reverb mode Audio settingsAdjust picture quality Select digital outputEnable night mode Night ModeSelect sampling rate Set the sleep timer Other featuresSet the alarm timer Activate and deactivate alarm timerProduct information SpecificationsUSB playability information Supported MP3 disc formatsGeneral information Replace or clean the disc TroubleshootingRemote control does not work Multi-language sound or subtitle is not recorded on the DVDCannot display some files in USB device Poor radio receptionGlossary JpegMP3 PBC MultichannelParental control PCM