Select sampling rate
You can select the Linear Pulse Code Modulation (LPCM) output sampling rate. The higher the sampling rate, the better the sound quality.
1 Press SYSTEM MENU.
2 Select [AUDIO SETUP] (audio setup)>[LPCM], and then press 
.
3 Select an option and then press OK.
•[48K]
For discs recorded at sampling rate of 48kHz.
•[96K]
For discs recorded at sampling rate of 96 kHz.
•[192K]
For discs recorded at sampling rate of 192 kHz.
4 Press SYSTEM MENU to exit.
Enable night mode
[NIGHT MODE]
Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
1 Press SYSTEM MENU.
2 Select [AUDIO SETUP] (audio setup)>[NIGHT MODE] (night mode), and then press 
.
3 Select an option and then press OK.
•[ON] (on)
Enjoy quiet viewing at night.
•[OFF] (off)
Enjoy surround sound with its full dynamic range.
4 Press SYSTEM MENU to exit.
E n g l i s h
EN 27