Basic Connections (continued)
OR
Option 1
English
Option 2
Step 3: Connecting to TV
This connection enables you to view the playback from this DVD system. You only need to choose one of the options below to make your video connection.
–For a standard TV, follow option 1.
–For a progressive scan TV, follow option 2.
–For TV with scart connector only, use the supplied scart adaptor.
IMPORTANT!
Connect the DVD system directly to the TV.
Option 1: Using the Video (CVBS) socket (good picture quality)
Use the supplied composite video cable (yellow) to connect the CVBS socket on the DVD system to the video input socket (or labeled as A/V In, Video In, Composite or Baseband) on the TV.
Option 2: Connecting to a Progressive Scan TV or component video input
The progressive scan video quality is only available when using Y Pb Pr connection and a progressive scan TV is required. It provides superior picture quality when watching DVD movies.
A Follow option 1 to make the basic video connection.
B Use the component video cables (red/ blue/green - not supplied) to connect the Y PB PR sockets on the DVD system to the corresponding component video input sockets (or labeled as Y Pb/Cb Pr/ Cr or YUV) on the TV.
C If your TV accepts progressive signals, proceed to ‘Getting Started - Step 5: Setting up Progressive Scan feature’ for detailed progressive feature setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
15