English
DVD Setup Menu Options (continued)
Video Setup Page (underlined options are the factory default settings)
TV Type | Selects the colour system that matches the connected TV. It will | ||
| enable playback of a different type of disc (PAL or NTSC disc) on | ||
| this DVD system. |
| |
| { PAL } | – | For |
| { NTSC } | – | For |
| { Multi } | – | For TV that is compatible with both PAL and |
|
|
| NTSC. |
|
| ||
TV Display | The picture shape can be adjusted to fit your TV. | ||
| { 4:3 Letter Box } – For a | ||
|
|
| with black bars on the top and |
|
|
| bottom. |
| { 4:3 Pan Scan }– | For a | |
|
|
| sides trimmed. |
| { 16:9 Wide Screen } – For | ||
|
|
| (frame ratio 16:9). |
| Before enabling the progressive scan feature, you must ensure that | ||
Progressive | |||
| your TV can accept progressive signals (a progressive scan TV is | ||
| required) and that you have connected this DVD system to your | ||
| TV using the Y Pb Pr (see ‘Option 2: Connecting to a Progressive | ||
| Scan TV or component video input’). | ||
| { On } | – | Turns on progressive scan mode. |
|
|
| Read the instructions on the TV and confirm |
|
|
| your action by pressing OK on the remote |
|
|
| control. |
| { Off } | – | Disables the progressive scan mode. |
Note: If no picture appears, wait for 15 seconds for auto recovery.
Otherwise, turn off the progressive scan as below:
1)Press OPEN CLOSE to open the disc tray.
2)Press W on the remote control.
3)Press MUTE on the remote control.
36