Philips HTS3325/51 Setting the TV, Repeat steps C ~ D for other settings, Ntsc, Multi

Getting Started (continued)

English

If the language you want is not available in the list, select { Others }.

Use the numeric keypad (0-9) on the remote control to enter the 4-digit language code ‘XXXX’ (see page 4) and press OK to confirm.

E Repeat steps C ~ D for other settings.

Helpful Hints:

–During DVD playback, you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control. However, this does not change the default settings you have made here.

–For some DVDs, the subtitle/audio/menu language can only be changed via the DVD disc menu.

Step 4: Setting the TV

Selecting the matching colour system

The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV.

A In ‘DISC’ mode, press SETUP on the remote control.

B Press X repeatedly to select { Video Setup Page }.

C Press T to highlight { TV Type }, then press X.

Video Setup Page

TV Type

TV Display

Progressive

Picture Setting

NTSC

PAL

Multi

{ PAL }

Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.

{ NTSC }

Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.

{ Multi }

Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

TIPS: The underlined option is the factory default setting.

Press W to go back to the previous menu item. Press SETUP to exit the menu.

20