2 Press 
to change the volume level, then press OK.
»The test tone is emitted from the speaker.
•Repeat the above setting for other speakers until all the speakers output level sounds equally balance.
•To exit the menu, press 
SETUP.
To set the output delay time (center and rear speakers only)
1 Select [Speakers Delay] in the menu, then press 
.
Speakers Distance Setup
Center |
| 0MS |
| ||
Rear Left |
| 0MS |
| ||
Rear Right |
| 0MS |
|
2 Press 
to set the delay time, then press OK.
•Repeat the above setting for other speakers until the sound output from different speakers reach the listening position at the same time.
•To exit the menu, press 
SETUP.
Tip
•Set a longer delay time if the center speaker or rear speaker is closer to the listening position than the front speaker.
•Allow 1ms setting for every 1 foot distance between the speaker and the listening position.
Select a play source
On the main unit
•Press SOURCE button repeatedly to select: DISC > USB > FM > AUX 1 > AUX 2 > DISC ...
On the remote control
•Press AUDIO SOURCE repeatedly to switch to the connected audio source.
Display | Device connected to |
AUX 1 | AUDIO |
AUX 2 | AUDIO |
•Press RADIO to switch to FM band.
•Press USB to switch to USB mode.
•Press DISC to switch to disc mode.
16EN