10 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the Home Theater System.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the Home Theater System, check the following points before requesting service. If the problem remains unsolved, register your Home Theater System and get support at www.philips.com/ welcome.
If you contact Philips, you will be asked for the model and serial number of your Home Theater System.The model number and serial number are on the back or bottom of your Home Theater System.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this Home Theater System do | ish | |
not work. |
| Engl |
• Disconnect this Home Theater System |
| |
from the power outlet for a few minutes, |
| |
then connect again. | Troubleshooting | |
|
| |
Picture |
| |
|
| |
No picture. |
|
|
• See TVs manual for correct video input |
| |
channel selection. Change the TV channel |
| |
until you see the DVD screen. |
| |
• Press DISC. |
| |
• If you have changed the [TV Display] |
| |
setting, switch back to default mode: 1) |
| |
Press | to open the disc compartment. 2) |
|
Press | . 3) Press SUBTITLE. |
|
Sound
No sound.
•Ensure that the audio cables are connected and press the correct input source (for example, AUDIO SOURCE, USB) to select the device you want to play.
•If this Home Theater System does not support DTS surround sound, ensure that the play source is not from DTS audio stream.
No sound from TV program.
•Connect an audio cable from the AUDIO input on this Home Theater System to the AUDIO output on your TV. Then press AUDIO SOURCE repeatedly to select the corresponding audio input source.
EN 35