[Sleep Timer]
Switches to standby automatically after the preset time.
•[15 mins], [30 mins], [45 mins], [60 mins]
– Selects the count down time before the Home Theater System switches to standby.
•[Off] – Disables sleep timer mode.
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
•Enter this Home Theater System DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.
Audio setup
Audio Setup
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
1 Press 
SETUP.
»[General Setup] menu is displayed.
2 Press 
to select [Audio Setup], then press 
.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•To return to the previous menu, press 
BACK.
•To exit the menu, press 
SETUP.
Note
•See the explanations of the above options in the following pages.
[Speakers Volume]
Sets the volume level of each speaker to get the ideal audio balance.
1)To start, press OK.
2)Select a speaker in the menu, then press 
to adjust the volume level.
3)Press OK to confirm and exit.
Note
•The test tone is emitted from the speaker which you adjust.
[Speakers Delay]
Sets the delay time for the center and rear speakers if they are placed closer to the listening position, so that the sound output from all speakers reach the listening position at the same time.
1)To start, press OK.
2)Select a speaker in the menu, then press 
to set the delay time.
3)Press OK to confirm and exit.
Note
•Allow 1ms setting for every 1 foot distance between the speaker and the listening position.
[Night Mode]
Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[On] – Enjoys quiet viewing at night.
•[Off] – Enjoys surround sound with a full dynamic range.
28EN