Radio Reception
English
D 
7
Tuning to radio stations
1Press SOURCE on the set (or FM on the remote control ) repeatedly until FM is displayed.
2Press down on TUNING à / á (or à / á on the remote control) and release the button. ➜ The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING à / á (or à / á on the remote control) briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio stations in the memory.
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press PROG on the remote control to activate programming.
➜ PROG flashes in the display.
3Press í/ ë to allocate a number from 1 to 20 to this station.
4Press PROG on the remote control again to confirm the setting.
➜ PROG disappears.The preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press í/ ë until the desired preset station is displayed.
Automatic programming
Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.
●In tuner mode, press and hold PROG until “AUTO” appears on the display panel.
➜ All previously stored radio stations will be replaced.
32