Clock/Timer
Viewing clock
●The clock (if it is set) is shown in normal standby mode.
To view the clock in any sound source (CD or FM for example )
●Press briefly DISPLAY/CLOCK (or CLOCK on the remote control ).
Setting clock
1In standby mode, press and hold DISPLAY/ CLOCK.
➜The clock digits flash on the display panel.
➜If the clock has not been set, "00: 00" flashes
2Press TUNING à / á (or à / á on the remote) to set the hours.
3Press í/ ë to set the minutes.
4Press PROG to select between 12 hour and 24 hour display.
5Press DISPLAY/CLOCK agian to store the setting.
➜ The clock starts working.
Notes:
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 90 seconds.
–To exit clock setting without storing, press STOP on the system to exit.
Setting wake-up timer
The system can switch on to DISC,TUNER or USB mode automatically at a preset time, serving as an alarm to wake you up.
IMPORTANT!
–Before setting the timer, ensure that the clock is set correctly.
–To set a new timer, you need to deactivate the previously set timer.
1 In standby mode, press and hold SLEEP/ TIMER on the remote for more than 2 seconds to enter timer setting mode.
➜ The source and timer digits will be lighted on the display panel.
➜ “ 00: 00 “ will be displayed briefly if
2Press DISC, USB or TUNER to select the desired source.
●Before setting timer, make sure the music source has been prepared.
DISC – load the disc.
TUNER – tune to the desired radio station. USB – connect a USB device.
3Press TUNING à / á (or à / á on the remote) to set the hours.
4Press í/ ë to set the minutes.
5Press SLEEP/TIMER to store the time.
●At the preset time, the selected source will play.
To deactivate the wake-up timer
●In standby mode, press SLEEP/TIMER until “TIMER OFF” is displayed on the panel.
Notes:
–The system will exit timer setting mode if no button is pressed within 90 seconds.
–Display shows 
if activated, and disappears if deactivated.
Setting sleep timer
The sleep timer enables the system to switch off by itself after a set period of time.
1During playback, press SLEEP/TIMER on the remote control repeatedly to select sleep options.
➜ The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™120 ™ OFF
2Press SLEEP/TIMER until you reach the desired length of time.
To deactivate the sleep timer
●Press SLEEP/TIMER repeatedly until "OFF" is displayed, or press the STANDBY ON y button.
English
35