Setting the clock
1
In Standby mode, press and hold CLOCK/RDS on the remote until the time flashes on the display.
2
Press VOLUME +/ - (VOL+/- on the remote) to set the hours and CLOCK/RDS to confirm.
3
Press VOLUME +/ - (VOL+/- on the remote) to set the minutes and CLOCK/RDS to confirm.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode or turn on to the interlaced mode.
2)Press SYSTEM MENU on the remote to exit the system menu and then DISC 1 (or DISC 2) and “1” to exit progressive scan.
ANALOG AUDIO SETUP
DIGITAL AUDIO SETUP
PICTURE SETTING
DIVX (R) VOD
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.