Other settings
TV demo
Start a demo to find out more about your TV's features.
Note: Demos are not supported on MHEG channels.
1.While you watch TV, press 
.
2.Select [Setup] > [Watch demos], then
press OK.
3.Select a demo, then press OK.
4.Press 
to exit.
Update software
TV software
Check software version
1.Press 
.
2.Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is displayed.
Caution: Do not install a lower version of software than the current version installed on your product. Philips cannot be held liable or be made responsible for problems caused by a software downgrade.
Update the software through one of these options:
∙update with USB flash drive
∙update from digital broadcast
∙update from the Internet
For more information, see the following pages.
Update with USB
Before performing this procedure, make sure that you have the following:
∙Spare time to complete the entire update.
∙A USB flash drive that has at least 256MB of storage space, is FAT or DOS formatted, and has its write protection disabled.
∙Access to a computer with a USB port and internet access.
Note: Do not use a USB hard drive. | English | |
| ||
1. | Press . |
|
2. | Select [Setup] > [Update software], then |
|
press OK.
The update assistant starts.
3.Follow the onscreen instructions to start the update.
Note: The update assistant directs you to the Philips support website. Refer to the installation instructions on the website to complete the update.
Update from the Internet
To update the TV software directly from the Internet, connect the TV to the Internet through a router with a
1. Press 
> [Setup] > [Update software], then press OK.
2.Select [Internet], then press OK.
3.Follow the onscreen instructions to start the update.
When the update is complete, the TV switches off and back on again automatically. Wait for the TV to switch back on. Do not use the power switch on the TV or the remote control.
Note: If the TV is connected to the Internet, the TV displays the availability of new software at startup.
Update from digital broadcast
When available, your TV can receive software updates through digital broadcasts. A message appears prompting you to update the software. We strongly recommend that you update the software when prompted.
Follow the instructions on screen.
Note: If you choose to update the software at a later time, select 
> [Setup] > [Software settings] > [Local updates].
EN 41
