Set locks and timers
Clock
You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator.
Display the TV clock
1.While you watch TV, press 
OPTIONS.
2.Select [Status], then press OK.
The clock is displayed on the lower right hand corner of the TV screen.
Change the clock mode
The clock mode is automatically synchronised to the Coordinated Universal Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to [Manual].
1.While you watch TV, press 
.
2.Select [Setup] > [TV settings] >
[Preferences].
3.Select [Clock] > [Auto clock mode].
4.Select [Automatic], [Manual] or [Country dependent], then press OK.
Enable or disable daylight saving If clock mode is set to [Country dependent], you can enable or disable daylight saving for your time zone.
1.In the [Clock] menu, select [Daylight saving] > [Daylight saving time] or [Standard time], then press OK. Daylight saving is enabled or disabled.
Set the clock manually
If clock mode is set to [Manual], set the date and time manually.
1.In the [Clock] menu, select [Date] or [Time], then press OK.
2.Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.
Sleeptimer
Sleeptimer switches the TV to standby after a specified time. You can switch off your TV earlier or reset the sleeptimer during the countdown.
1.Press 
.
2.Select [Setup] > [TV settings] >
[Preferences] > [Sleeptimer].
3.Press the Navigation buttons to set the sleeptimer.
The sleeptimer can be set up to 180 minutes, in steps of five minutes. The sleeptimer is switched off if it is set to zero minutes.
4.Press OK to activate the sleep timer. The TV switches to standby after the specified time.
Child lock
To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes.
Set or change the child lock code
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Child lock].
3.Select [Set code], or [Change code].
4.Enter the code with the Numeric buttons.
Tip: If you forget your code, enter '8888' to override any existing codes.
Lock or unlock channels
1.In the child lock menu, select [Channel lock].
2.Enter the child lock code with the Numeric buttons. The [Channel lock] menu appears.
3.Select channels to lock or unlock.
EN 30
