Pause live broadcast
While you watch a live TV broadcast on a digital channel, you can pause the broadcast and continue watching it later. You can pause TV to answer an urgent phone call or have a break without having to wait for the TV commercials. Meanwhile, the broadcast is stored on the USB hard disk.
Note: You can pause a broadcast for a maximum time span of 90 minutes.
∙To pause a live TV broadcast, press 
(pause). A progress bar appears briefly on screen.
∙To continue watching, press 
(play).
∙To switch to live TV broadcast again, press 
(stop).
Once you switch to a digital channel, the USB hard disk starts storing the broadcast.
The stored broadcast on the USB hard disk is cleared when:
∙you switch the TV to standby.
∙you switch to another channel. The USB hard disk starts storing the content on the new channel broadcast.
∙you start watching a programme from a connected device - a
While a programme is recording to the USB hard disk, you cannot pause a live TV broadcast.
Instant replay
While you watch a live TV broadcast from a digital channel, you can replay the broadcast instantly.
To replay the last 10 seconds of a live TV broadcast, press 
(pause) and press the left
navigation button on the remote control.
To jump back several steps of 10 seconds,
press the left navigation button repeatedly.
To jump back to the beginning of the TV broadcast, press the left navigation button
repeatedly until you reach the beginning of | English |
| |
the broadcast storage or the maximum |
|
timespan. |
|
Progress bar |
|
To display the progress bar while you watch |
|
TV, press (pause). |
|
With the progress bar on screen, press |
|
(reverse) or press (forward) to select |
|
from where you want to start viewing the |
|
stored broadcast. |
|
Press these buttons repeatedly to change |
|
their speed. |
|
Start recording
If your TV is connected to the Internet, you can record a TV programme onto the USB hard disk. Start and manage the recordings you make from the programme guide on the TV.
Press 
and select [Programme guide]. If you find a TV Recording button on the programme guide page, you can access the programme guide to start and manage recordings.
If the TV Recording button is not present, check if the programme guide data is set to
be updated through the network. Select 
> [Setup] > [TV settings] > [Preferences] >
[Programme guide] > [From network].
Record now
To record the programme you are watching, press 
and select [Programme guide]. With the current TV programme
highlighted, press 
OPTIONS and select Record programme. The USB hard disk starts recording and stops at the end of the programme.
To stop recording immediately, access the [Programme guide] and press 
OPTIONS, select Stop recording.
EN 27
