Philips 46PFL66X6T, 55PFL66X6T, 40PFL66X6H Control devices simultaneously, Select speaker output

What you need

To benefit from Philips EasyLink advanced control features, make sure that you do the following:

∙Connect at least two HDMI-CEC compliant devices through HDMI

∙Configure each HDMI-CEC compliant device properly

∙Switch on EasyLink

Switch on

To switch on or off EasyLink

Note: If you do not intend to use Philips Easylink, switch it off.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3. Select [On] or [Off], then press OK.

Control devices simultaneously

If you connect multiple HDMI-CEC devices that support this setting, all the devices respond to the TV remote control.

Caution: This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3.Select [EasyLink Remote Control] > [On] or [Off].

4.Press OK to activate.

Notes:

∙To switch back to TV control, press , then select [Watch TV].

∙To control another device, press , then select the device from the Home menu.

∙To exit, press .

EasyLink buttons

Control HDMI-CEC compliant devices with the following buttons on the TV remote control.

∙OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu.

EN 34

∙ (Previous) / (Next): Search backwards and forwards on the connected device.

∙Numeric buttons: Select a title, chapter or track.

∙Play buttons: Control video or music play.

∙Standby: Display the menu of the connected device.

∙: Display the TV menu.

∙ (Standby): Switch the TV and the connected device to standby.

Other EasyLink buttons are available through the On-Screen Remote Control (OSRC).

To access the OSRC

1.While you view content from a connected

device, press OPTIONS.

2.Select [Show device keys], then press OK.

3.Select an onscreen button, then press OK.

4.Press to exit.

Select speaker output

If the connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI

cable. An additional audio cable is not required. See Connect your TV > About cables > HDMI (Page 43).

Configure TV speakers

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

3.Select one of the following options, then press OK:

∙ [Off]: Switch off TV speakers.

∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the

adjust menu.

∙ [EasyLink autostart]: Turn off TV speakers automatically and stream TV audio to the connected HDMI-CEC audio device.