Maxtor NVR-2028 manual Change Schedule Setting

11.4 Change Schedule Setting

Please follow the steps below to change the Timer Record setting through the network as and when necessary.

1.Click the button on the home page to enter the setup mode.

2.Click the connection on the setting page to enter the Timer Record setting page.

3.Set the SCHEDULE RECORD to ON to enable the SCHEDULE RECORD function.

4.There are two time-periods available for scheduling each day. The Timer Record setting page allows users to program the time each day that the NVR will start and stop recording. The time is displayed in a 24-hour clock format. If there is a time overlap showing between two continual time-period settings, the device will automatically combine the two time-period settings into one combined time-period setting.

5.Click the button to submit the new Timer Record setting.

6.Click the button to return to the home page while the new image setting acts on the images to effect the desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry onto the home page will find images in their earlier or original setting. )

81