6.
6. Secure the driver in the rack using two
| mounting screws in both the |
| |
| tighten the screws too much, otherwise |
| that may damage the driver. |
|
|
| 7. Screw the rack into the device, screwing |
7. | 8. |
in all the four screws. |
8. Attach the interface connector and the power connector to the drive. Please note the red lining of the IDE cable and the red wire of power cable must line up side by side.
10.
Place the mobile rack back onto the device and screw it in.
6.2 Mobile Rack
1. Make sure that the key unlocked.
54
