Maxtor NVR-2028 manual Alarm Recording, 30 SEC

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM OPERATION, ALM DURATION, MAX REC RATE, and PRE-ALARMsettings, please refer to section 5.4 for more details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select ALARM and press the Enter button to enter the ALARM SETTING.

(3)Set the desired ALM DURATION and MAX REC RATE for use.

(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.

MAIN MENU

LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION	: ON
ALM DURATION	: 30 SEC
MAX REC RATE	: UNLIMIT
PRE- ALARM	: OFF

MAIN PAGE

ALARM REC ENABLE

(5)To active the motion alarm recording, Select MOTION SETTING and press the Enter button to enter the MOTION SETTING PAGE, set MOTION ENABLE TO ON, and set a suitable SENSITIVITY and REGION according to the video sources. (Please refer to the next section 4.2.4)

20