Switch AdministrationLogs and Alarms
To see the route, enter the show route command on SW2
SmartCell ZX # show route |
|
| |
ROUTE NET TABLE |
|
|
|
destination | gateway | flags Refcnt Use | Interface |
0.0.0.0 | 0.0.0.0 | 1 | 0 | 0 | zn0 |
90.1.1.0 | 90.1.1.33 | 1 | 0 | 1688 | zn1 |
128.205.99.0 | 90.1.1.254 | 1 | 3 | 5660 | zn1 |
ROUTE HOST TABLE |
|
|
|
destination | gateway | flags Refcnt Use | Interface |
127.0.0.1 127.0.0.1 5 0 0lo0
SmartCell ZX #
ELAN
Switch client on SW1,
SW2 |
IISP Route |
| IP Route |
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
|
| |
|
| |
|
| |
|
|
SW1 |
Switch client
on SW2, 90.1.1.33
Switch client on SW1 is defined as SW2’s gateway to the Ethernet
NMS
90.1.1.254
Ethernet interface
128.205.99.254
Ethernet network 128.205.99.0
Figure 4-3 IP routing through SW1 for connectivity to the Ethernet network
4.4LOGS AND ALARMS
This section discusses the log and alarm features, concepts, and the commands provided by the SmartCell 6A000 switch for setting and using the log and alarm options.
SmartCell 6A000 User Guide
