4.2.4 Motion Detection
Take the steps detailed below to activate a programmed motion detection. For MOTION SETTING, as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION, please refer to section 5.4 for further details.
(1)Press the Setup button 
to enter the MAIN MENU.
(2)Select the item termed "LAN CAMERA" and press the Enter button 
to enter the LANCAM SETTING page.
(3)Select the item termed "MOTION" and push the Enter button 
to enter the MOTION SETTING page.
(4)To activate the motion detection function, set "MOTION ENABLE" to "ON". To deactivate the function, set "MOTION ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the channels in the MOTION ENABLE SETTING page off and on respectively as well. If you wish to select individual channels for viewing, select the item termed " SET" and activates your desired channels by pressing them "ON" while turning the rest "OFF". Confirm your choices by pressing "OK". If not, push "CANCEL".
(5)In the MOTION SETTING page, select the entry termed "SENSITIVITY / REGION" and press the “>” button 
to show all the channels in their order, each in turn. Use the “^” button 
and the “v” button 
to select a desired channel for setting. Press the Enter button 
and set the channel in the SENSITIVITY / REGION SETTING page. Repeat the process for all other channels you choose.
(6)To set "SENSITIVITY" and "REGION" for activation on the SENSITIVITY / REGION page, choose your degree of sensitivity and then push the Enter button 
. At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button 
and the “>” button 
to confirm either "OK" or "CANCEL" respectively.
21
