Maxtor NVR-2028 manual Playback Operations, Fast Forward/Reverse, Rec → 〔Stop 〕 →

4.3 Playback Operations

This section shows you how to operate the fast, slow, and single-picture playback functions, and details how the unit is to playback a file in a different operation status. Please refer to the following paragraphs specifying the relevant details. When playing a file, the monitor should display a flashing PLAY message and the PLAY button will light up indicating that the NVR is in the playback status.

Operation Status

A. From REC mode to Playback mode

(In live mode, directly press the PLAY button to play a latest recorded video)

REC→〔STOP〕→	〔PLAY〕……………………………… Play the latest recorded file
	〔Play to the end of the file〕…Show the ending message (use search functions or
	rewind to replay the file if required)

〔STOP〕→〔PLAY〕…………Play the file from the stop position

B. Search to play back a particular recorded video

Search→〔PLAY〕………………………………………… Play a selected file

〔Play to the end of the file〕…………Show the ending message (Search again or rewind to

replay the file if required)

〔STOP〕→〔PLAY〕…………………Play the file from the stop position

4.3.1 Fast Forward/Reverse

There are 7 speeds available for playback: 1x, 2x, 4x, 8x, 16x, 32x and 100x

While playing back recorded video at recorded speed:

Forward: Turn the Shuttle dial to the right to view the recorded video in the forward direction at a speed faster than the recorded speed. Each subsequent turn of the shuttle to the right increases the forward rate, as 2x, 4x, 8x, 16x, 32x and 100x.

Reverse: Turn the Shuttle dial to the left to view the recorded video in the reverse direction at a speed faster than the recorded speed. Each subsequent turn of the shuttle to the left increases the reverse rate, as -1x, -2x, -4x, -8x, -16x, -32x and -100x.

Normal: Release the Shuttle dial to return to the normal speed of playback.

24