10.1.3View the NVR video from a remote PC
Once the Network Viewer is executed a Login inset will appear. You must enter the default User Name: admin, and password: 9999 into the respective entries and click OK to log into the application.
Follow the instructions below to use the Network Viewer to browse a NVR video from a remote location. Upon entering the Network Viewer, the connection box will appear as follows.
1.Click the Find tag to connect all the NVR devices in the LAN.
2.Choose a channel number from the Channel
3.Type in the user name for the chosen NVR.
4.Type in the password of the device and click the Modify tag to add the device to the Device List.
5.Please repeat steps 2 to 4 again for another selection.
6.Select the NVR to enter this device.
7.Click the Login tag to begin viewing images.
NOTE: Upon connection, the connection status box will indicate the name and IP address of the selected device. If there’s a failure to connect, a “Fail” message appears on the screen right after the device IP address; otherwise an “OK” appears. To add more connections or units to the NVR, please repeat the above instructions.
67
