MAIN MENU

LAN CAMERA

RECORD / BANDWIDTH

CLOCK / TIMER / SEQ

ALARM

COMMUNICATION

DISK

SYSTEM

LANCAM SETTING

LANCAM SETTING

AUDIO ENABLE : OFF

ON

SET

MAIN PAGE

SET AUDIO ON/OFF INDIVIDUALLY

AUDIO ENABLE:

LANCAM SETTING

IP / ACCOUNT

: SET

IMAGE

: SET

AUDIO ENABLE

 

: OFF

MOTION

: OFF

MAIN PAGE

SET AUDIO ENABLE

AUDIO ENABLE SETTING

CH1 CH2 CH3 CH4

OFF OFF OFF OFF

CH5 CH6 CH7 CH8

OFF OFF OFF OFF

OK CANCEL

(1)Press the Setup button to enter the MAIN MENU.

(2)Select the item termed "LAN CAMERA" and press the Enter button to enter the LANCAM SETTING page.

(3)Select the item termed "AUDIO ENABLE" and push the Enter button to select the

AUDIO ENABLE.

(4)To activate the motion detection function, set " AUDIO ENABLE" to "ON". To deactivate the function, set " AUDIO ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the channels in the AUDIO ENABLE SETTING page off and on respectively as well. If you wish to select individual channels for sounds, select the item termed " SET" and activates your desired channels by pressing them "ON" while turning the rest "OFF". After set individual channels in different modes and then push the Enter button . At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button and the “>” button to confirm either "OK" or "CANCEL" respectively. Press "OK" to ratify your choice(s). If not, press "CANCEL".

37

Page 39
Image 39
Maxtor NVR-2028 manual SET Audio ON/OFF Individually