11.5 Change Wireless Setting

Please follow the steps below to change the Timer Record setting through the network as and when necessary.

1.Click the button on the home page to enter the setup mode.

2.Click the connection on the setting page to enter the WIRELESS SETTING page.

3.Set the ESSID to change the wireless network name.

4.Adjust the wireless setting, including the “CHANNEL”, “ENCRYPTION”, and “DEFAULT KEY” as and when necessary.

5.If ENCRYPTION is set to “DISABLE”, the user cannot change the WEP KEY 1 … WEP KEY 4. If ENCRYPTION is set to “WEP64”, the web key can be set to a 10-hex number. If ENCRYPTION is set to “WEP128”, the web key can be set to a 26-hex number.

6.Click the button to submit the new wireless setting.

7.Click the button to return to the home page while the new image setting acts on the images to effect the desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry onto the home page will find images in their earlier or original setting. )

82

Page 84
Image 84
Maxtor NVR-2028 manual Change Wireless Setting