Maxtor NVR-2028 manual RS232, Main Wireless Setting, Operation

5.5 COMMUNICATION

This option allows you to configure the status of the RS-232 communication port when connected to an external device, and the wireless communications settings. (Please refer to the APPENDIX 2 and Network Function for more details)

MAIN MENU

LAN CAMERA RECORD / BANDWIDTH CLOCK / TIMER / SEQ ALARM COMMUNICATION DISK

SYSTEM

GOTO COMM PAGE

WIRELESS:

COMM SETTING
	: SET
WIIRELESS
WAN SETTING	: SET
NET IP	: SET
NET DHCP	: SERVER
LEASED IP TABLE	: ENTER
IP POOL RANGE	: SET
COMM ID	: 01
RS232	: ON

MAIN PAGE

WIRELESS SETTING

This entry allows users to set the wireless setting.

OPERATION:

This option is used to configure the wireless operational settings.

WIRELESS SETTING

OPERATION	: SET
PRIVACY	: SET
LANCAM SETUP	: RS232

COMM PAGE

WLAN OPTIONAL SETTING

ESSID:

OPERATIONAL SETTING

ESSID: SET

CHANNEL : 06

WIRELESS PAGE

SET NETWORK NAME

This option enables you to change the wireless network name. Unique identifier for the Extended Service Set (ESS) which is shared by client stations in an infrastructure association, such as the WLAN-test. It is case-sensitive and cannot exceed 32 characters.

NOTE: If you use more than two NVR units, take care not to use the same ESSID name for both, since the client device can only connect with one server each time and will automatically connect with the nearest unit.

43