5.3 CLOCK / TIMER / SEQ SETTING

The NVR-2028 provides a weekly table, consisting of two periods of time each day for scheduled recording. This option allows you to set the time each day that the NVR will start and stop recording.

MAIN MENU

LAN CAMERA

RECORD / BANDWIDTH

CLOCK / TIMER / SEQ

ALARM

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK / TIMER / SEQ PAGE

CLOCK SETTING:

This entry allows users to set the system time.

CLOCK / TIMER / SEQ

CLOCK SETTING

: SET

TIMER

: SET

SEQUENCER

: SET

MAIN PAGE

SET CURRENT CLOCK

NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up (Operate On mode).

TIMER:

This entry allows users to program the time each day that the NVR will start and stop recording. There are two time periods each day available for scheduling. The time is displayed in a 24-hour clock format. If there is a time overlapping showing between two continual time period settings, the device will automatically combine the two time-period settings into one combined time-period setting.

TIMER ENABLE: This option enables/disables the programmed scheduled recording. ON: Enables the scheduled recording.

OFF: Disables the scheduled recording.

REC SCHEDULE

TIMER ENABLE: ON

START END

START END

S 06:00-16:00

12:00-18:00

REC SCHEDULE

TIMER ENABLE: ON

START END

START END

S 06:00-18:00

00:00-00:00

 

 

 

 

SEQUENCER:

To regulate dwell time of the sequencer, you can use the “^” button and the “v” button to select dwell time provided here, ranging from the "00" to the "30".you can set individual channels in different dwell time. After set individual channels, quad and multi screen in different modes and then push the Enter button . At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button and the “>” button to confirm either "OK" or "CANCEL" respectively. Press "OK" to ratify your choice(s). If not, press "CANCEL".

41

Page 43
Image 43
Maxtor NVR-2028 manual REC Schedule Timer Enable on, 1200-1800, 0600-1800 0000-0000