7. O.S.D Message
No. | O.S.D Message | Meanings | |
1 | NO DISK | No | |
2 | BATTERY LOW | Suggest change the battery and reset the system time | |
3 | LOADING | System Boot up | |
4 | KEY LOCKED | Key lock function is on | |
5 | KEY UNLOCKED | Key lock function is off | |
6 | n1 OF n2 ITEMS PROGRESS n3 % | BACKUP n1/n2 NOW | |
7 | BACKUP COMPLETE | Backup complete | |
8 | HD2 SPACE NOT ENOUGH | HD2 has not enough space for backup | |
9 | NO ENTRY FOR BACKUP | No backup is possible. | |
10 | BACKUP INCOMPLETE | Backup incomplete, since the user has pressed the STOP | |
button to stop it | |||
|
| ||
11 | NOT FOUND | The system cannot find a video in the Search function. | |
|
|
| |
12 | END | Playback of recorded video has reached the end point | |
|
|
| |
13 | DISK FULL | ||
item in the setup menu is set to STOP. | |||
|
| ||
14 | EMPTY | The user presses the PLAY button or uses the SEARCH | |
function, but no video can be played. | |||
|
| ||
15 | SET TO NTSC, PLS RESTART | System has to be set to NTSC, please reboot (PAL is | |
similar) | |||
|
| ||
16 | SOFTWARE UPDATE | Software update | |
|
|
| |
17 | PLEASE RESTART | The system should be rebooted after the software has | |
been updated | |||
|
| ||
18 | NO DISK | The user has pressed the Save key without putting in a SD | |
card, or there is a disk error. | |||
|
| ||
19 | DATA NOT CONTINUOUS | The system finds data in installed HDs cannot be used | |
contiguously. Suggest you remove HD2 from the system. | |||
|
| ||
20 | DISK ATTACHED | HD2 has been attached. | |
|
|
| |
21 | DISK REMOVED | HD2 has been removed. | |
|
|
| |
22 | FAN STOPPED | The chassis fan has stopped for over 30 seconds. | |
23 | HDn ERROR AT xxxxx | There is a | |
|
| ||
24 | NOT PRESENT | When the user tries to clear a disk that was not attached in | |
the setup menu. | |||
|
| ||
25 | SAVE TO DISK | Start saving to the JPEG file. | |
26 | SAVE TO Fnnn. JPG | Save to Fnnn. JPG (where nnn= 0..999) | |
27 | SAVE OK | Save to the JEPG is ok. | |
28 | SD CARD WRITE PROTECT | An SD card is | |
29 | NO CHANNEL ENABLE | No channel available. | |
30 | WIRELESS MODULE ERROR | The wireless module has an error. |
57
