Maxtor NVR-2028 manual Setup/Save button, Left / Right CH1-CH5 /CH2-CH6 buttons, Rec Indicator

Setup/Save button:

Press this to enter the setup menu. Press again to exit the setup mode. In SD card backup mode, press to save the desired still image to SD card. Search button:

Press to enter the search mode to access recorded video.

In the LANCAM SETTING mode, use these buttons to search for the desired LAN Camera in the LAN.

Left / Right (CH1-CH5 /CH2-CH6 ) buttons:

In setup menu/ search mode, press these two buttons to highlight desired items in the menu setup mode.

In the live mode, press	or	buttons to select channel 1 or 2 respectively to get a full-screen
display. In order to display channel 5 or 6, please press Shift button while pushing			or
buttons respectively to see the selected channel.
In the play mode, press	or	buttons to see channel 1 or 2 respectively, first as a zoom	-in,

small-screen display, next as a full-screen display. Similarly, in order to display channel 5 or 6 in

the play mode, press Shift button while pushing or buttons respectively to see the selected channel, first as a zoom-in, small-screen display, and next in a full-screen view.

Up / Down ( CH4-CH8 /CH3-CH7 )buttons:

In setup menu/ search mode, press these two buttons to select the desired contents for programming in the setup menu mode.

In the live mode, press	or	buttons to select channel 4 or 3 respectively to get a full-screen
display. In order to display channel 8 or 7, please press Shift button while pushing			or
buttons respectively to see the selected channel.
In the play mode, press	or	buttons to see channel 4 or 3 respectively, first as a zoom	-in,

small-screen display, next as a full-screen display. Similarly, in order to display channel 8 or 7 in

the play mode, press Shift button while pushing or buttons respectively to see the selected channel, first as a zoom-in, small-screen display, and next in a full-screen view.

Enter Button:

Press to enter a selected item and save the setting in the menu setup mode.

In the live or play mode, this button enables the user to access the multiple-channel screen display. Pressing this button repeatedly will enable a sequential display in the following order: first, a quad-mode display of channels 1-4, and then, 5-8, and a multiple-channel display of channels 1-8, in succession.

Shift button:

Press Shift button while pushing either the Left / Right buttons, or the Up / Down buttons, to see any corresponding channel between channels 5-8.

Press Shift and Enter buttons simultaneously for a sequential display in the exact same order given above. (please refer to the “NOTE” given below)

T-rec Indicator:

This indicator of the timer recording mode lights up to signal the scheduled record setting is on.

7