Connections
English
Using an accessory RF modulator
IMPORTANT!
–If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
1Use the composite video cable (yellow) to
connect the DVD system’s VIDEO jack to the video input jack on the RF modulator.
2Use an RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the
RF modulator to the Antenna IN jack on the TV.
3Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.)
Step 5: Connecting FM/AM antennas
AM
1Connect the supplied AM loop antenna to the AM jack. Place the AM loop antenna on a shelf or attach to a stand or wall.
2Connect the supplied FM antenna to the FM (75 Ω) jack. Extend the FM antenna and fix its end to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Note:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.
14