Philips MCD908/37 owner manual Tune in to the correct frequency Connect the antennas

Page 41

Troubleshooting

The aspect ratio of the screen cannot be changed even though you have set the TV shape.

No sound or distorted sound.

The micro DVD player does not start playback.

The DVD micro system does not respond when the buttons are pressed.

Cannot activate some features, such as Angles, Subtitles, or multi-language Audio.

Considerable noise in radio broadcasts.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check that the speakers are connected correctly.

Replace the speaker cables.

Disconnect the headphones.

The system is in pause, slow motion or fast forward/reverse mode, pressÉÅto resume

normal play mode.

Insert a readable disc with the playback side facing down.

Check the disc type, colour system and regional code. Check for any scratches or smudges on the disc.

Press SYSTEM MENU to turn off the setup menu screen.

Cancel the parental control rating function or change the rating level.

Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.

Disconnect the power plug from the outlet and insert again.

Multi-language sound or subtitle is not recorded on the DVD.

Changing the language for the sound or subtitle is prohibited on the DVD.

The features may not be available on the disc.

Tune in to the correct frequency.

Connect the antennas.

Fully extend the FM wire antenna. Position for best reception and secure to a wall.

Connect an outdoor FM orAM antenna.

Adjust the direction and position for best reception.

Place the antenna farther away from any equipment that may be causing the noise.

Increase the distance between the system and your TV or other equipment.

English

41

Image 41
Contents DVD Micro Theatre Français EnglishPage Class II equipment symbol Clean only with dry clothIndex English Language CodeContents Other Functions System Menu OptionsGeneral Information FeaturesInstallation Supplied accessoriesMaintenance Environmental informationPlacing the speakers ConnectionsConnecting the control cable Connecting speakersConnecting TV Using Composite Video jackUsing S-Video jack Using Component Video jacks Y Pb PrEnglish Using an accessory RF modulator Connecting FM/AM antennasAdditional Connecting additional equipment Connecting the power cordUsing the VCR for recording DVDs B Connecting an active subwoofer DConnecting to a TV with Hdmi Jack E Functional Overview DVD player and power amplifierSource IR SensorProg Remote controlGoto Zoom§ Mode SLEEP/TIMERDISC/TUNER/AUX DIMSetting up the TV Inserting batteries into the Remote ControlUsing the Remote Control to operate Player Getting StartedTo deactivate Progressive manually Setting the OSD Language Setting language preferenceSetting the Audio, Subtitle and Disc Menu language To exit from the menuBasic Operations Dimming the display screen Demonstration modeTo activate the demonstration To deactivate the demonstrationRegion Codes Disc OperationsPlayable Discs Playing discsWMA Using the Disc MenuBasic playback controls Slow Motion DVD/VCD Repeat A-B DVD/VCD/CD/MP3/DivXProgram not for Picture CD Forward/Reverse Searching DVD/VCD DivX/CD/MP3/WMAPlaying MP3/WMA disc Special disc featuresPlaying MP3/WMA/JPEG Picture Playing Jpeg Picture CD Special Jpeg featuresPreview function Jpeg Zoom picture JpegPlaying a DivX disc Basic operations System Menu OptionsTV Display OSD LanguageDivx Code Spdif SetupScreen Saver Night Mode Dolby Digital Setup3D Processing HdcdQuality TV ModeComponent Resolution Hdmi SetupHdmi ParentalDefault Presetting radio stations Tuning to radio stationsListening to preset radio stations Other FunctionsSetting sleep/wake-up timer Setting the clockSleep timer setting Wake-up timer settingSpecifications Solution TroubleshootingProblem Tune in to the correct frequency Connect the antennas Troubleshooting Glossary Page Español Français