RIGHT AUDIO IN Pr/Cr
LEFT AUDIO IN Pb/Cb
Y
1
1 Connect the DVD Player’s Y CB CR (VIDEO OUT) jacks to the corresponding COMPONENT VIDEO IN jacks on the TV. Use component video cable (not supplied).
2 Connect the DVD Player’s red and white AUDIO OUT (left and right) jacks to the left/right AUDIO IN jacks on the TV. Use the supplied audio cables. Match the cable colors to the jack colors.
3 Plug the power cords of the DVD Player and the TV into an active power outlet. Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.
4 Turn on the TV power. Set the TV to the correct Component Video In channel. See your TV owner’s manual for details. Or, change channels at the TV until you see the DVD screen saver on the TV.
Connecting to a TV Only
TV has Component Video In Jacks (red, green, and blue)
Back of TV
(example only)
3
MDV450 25/09/2002 9:46 AM Page 12
12 Hookups (cont’d)
2
Helpful Hint
• On the TV, the component video in jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be green, blue, and red.
• Set VIDEO OUTPUT to YCBCR. Details are on page 34.
• If your TV has a single Audio In jack instead of separate left/right Audio In jacks, you will need a different audio cable. You need a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD Player to the single Audio In jack on your TV. See your electronics retailer for details.