Philips MDV450 owner manual SPDIF, Lpcm 96K Setup, Spdif Setup, Spdif OUT will be selected. Press

- - SPDIF SETUP - -

MDV450 25/09/2002 9:46 AM Page 38

38 SPDIF, LPCM 96K Setup

SPDIF Setup

SPDIF is the Sony Philips Digital Interface, or a method of transferring digital audio. If you connected the DVD Player to a Stereo using the OPTICAL or COAXIAL jack as shown on page 14, you need to adjust the SPDIF OUT setting as described below. If you are not using the OPTICAL or COAXIAL jack, no adjustment is necessary.

1 Press SYSTEM MENU.

2 Press 4 repeatedly to select SPDIF SETUP, then press OK.

3 SPDIF OUT will be selected. Press 2.

4 Press 3 or 4 to select RAW or PCM,then press OK. Choose RAW to select the original default audio settings as received by most Stereos. However, if the sound is distorted, your Stereo may need to receive audio in the PCM (pulse code modulation) format. Choose PCM if your Stereo is PCM-compatible. Refer to your Stereo owner’s manual for details.

- - SPDIF SETUP - -

SPDIF OUT	F	RAW
LPCM 96K		PCM
MAIN PAGE

RAW DATA VIA SPDIF

5 Press SYSTEM MENU to remove the menus.

LPCM 96K Setup

If you connected the DVD Player to a Stereo using the OPTICAL or COAXIAL jack as shown on page 14, you may need to adjust the LPCM 96K setting.

Discs are recorded in a certain sampling rate. (The higher the sampling rate, the better the sound quality.) Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM 96K to ON if you want the DVD Player to detect the sampling rate of Discs during playback and automatically choose the best sound available.

1 Press SYSTEM MENU.

2 Press 4 repeatedly to select SPDIF SETUP, then press OK.

3 Press 4 to select LPCM 96K, then press 2.

4 Press 3 or 4 to select OFF or ON, then press OK.

SPDIF OUT
LPCM 96K	F	OFF
		ON
MAIN PAGE

SET LPCM OUTPUT AS 96K

1,5

2-4

1,5

2-4

5 Press SYSTEM MENU to remove the menus.