Philips MDV450 owner manual Speaker Setup, 3D Sound

MDV450 25/09/2002 9:46 AM Page 37

Speaker Setup, 3D Sound 37

Speaker Setup

Adjust DOWNMIX according to how you connected the Player to your TV and/or Stereo. Balance the volume during playback by adjusting Dynamic Range Control (D.R.C.).

1 Press SYSTEM MENU.

2 Press 4 to select SPEAKER SETUP, then press OK.

3 Press 3 or 4 to select DOWNMIX or D.R.C., then press 2 and follow step 4 according to your choice.

• If you selected DOWNMIX, press 3 or 4 to select LT/RT
(left/right) or STEREO, then press OK. Choose LT/RT if you
4 connected the Player to a stereo that has Dolby Pro Logic. Details are
on page 13. Select STEREO if you connected the Player to a TV or
Stereo that has left and right Audio In jacks but does not have Dolby
Pro Logic.
- - SPEAKER SETUP PAGE - -
DOWNMIX	F	STEREO
D . R . C .		LT/RT

MAIN PAGE

STEREO DOWNMIX

•If you selected D.R.C., press 3 or 4 to select ON or OFF, then press OK. To level the volume during Disc playback, choose ON.There will not be such a large range between the loudest and softest parts of the sound.To hear the highs and lows of the volume, set D.R.C. to OFF.

-- SPEAKER SETUP PAGE - -

DOWNMIX

D . R . C .F ON

OFF

MAIN PAGE

DYNAMIC RNG COMPRESSION OFF

5 Press SYSTEM MENU to remove the menus.

3D Sound

Once you set DOWNMIX to LT/RT or STEREO, you can choose whether to activate the fuller 3D (three-dimensional) sound during Disc playback.

1 Press the DISPLAY button.

2	Press 2 repeatedly to select ON or OFF beside 3D.Then,
	press 3 or 4 to choose ON or				OFF.
	T:	1 / 3	C: 12	/ 30
	TC:	00:37:58	3D	ON

3 Press DISPLAY to remove the information box.

1,5

2-4

1,3

2