Tuner Operations
E n g l i s h
Tuning to radio stations
1Press SOURCE button until
“TUNER FM” appears on the display panel.
2Press 3 / 4 briefly on the remote.
➜ The display panel will show "SEARCH" until a radio station with sufficient signal strength is found.
3Repeat step 2 if necessary until you find the desired radio station.
4To tune to a weak station, press S / T briefly and repeatedly until an optimal reception is found.
●If the FM station reception is weak, press AUDIO to switch the FM mode from stereo to mono.
Helpful Hint:
– If the FM radio station is transmitting RDS (Radio Data System) data, the RDS name will be displayed and stored.
Presetting radio stations
You can store up to 40 FM preset radio stations in the memory.
Helpful Hints:
–The system will exit presetting mode if no button is pressed within 20 seconds.
–If no valid frequency is detected during Plug and Play," CHECK ANTENNA" appears.
Using the Plug and Play
Plug and Play allows you to store all available radio stations automatically.
DVD system’s
display panel
1 AUTO INSTALL..
SUBWOOFER
2 INSTALL TUNER
1For first time setup, press SOURCE to select TUNER mode.
➜ "AUTO INSTALL PRESS PLAY" appears.
2Press and hold 2; (PLAY PAUSE) until "INSTALL TUNER" appears on the display panel.
➜All the available radio stations with strong signal strength will be stored automatically.
➜Once complete, the last tuned radio station will play.
40
40 | 3139 115 2xxx1 | |
22/04/2005, 04:07 PM |