Philips HTS8010S/01B user manual Troubleshooting, Problem, Solution

Page 46

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power.

No picture.

Completely distorted picture or black/white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

Cannot activate some features such as Angles, Subtitles, or multi-language Audio.

Solution

Check if the AC power cord is properly connected.

Press the STANDBY ON on the front of the DVD system to turn on the power.

Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

Press SOURCE to select disc mode.

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see pages 20~21 for proper progressive scan set up or deactivate the progressive scan feature as below:

1)Turn off your TV progressive scan mode or turn on to interlaced mode.

2)Press EJECT on the main DVD system.

3)Press 1 on the remote control.

4)Press SUBTITLE on the remote control.

If this happens when you are changing the setting of the ‘TV TYPE’, wait for 15 seconds for the auto recovery.

If this happens when you are turning on the progressive scan feature, wait for 15 seconds for the auto recovery.

Check the video connection.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

Depending on the TV, it may not be possible to change the aspect ratio.

Adjust the volume.

Check the speaker connections and settings.

Make sure that the audio cables are connected and press the SOURCE button to select the correct input source (TV or AUX/DI, for example) to choose the equipment that you want to hear through the DVD system.

The features may not be available on the DVD.

Changing the language for the sound or subtitle is prohibited on this DVD.

Need Help? Visit us at www.philips.com/support

46

001-049 HTS8000S-00-Eng

46

3139 115 2xxx1

22/04/2005, 04:07 PM

Image 46
Contents Need help fast? Varoitus Español IndexEnglish 138For Customer Use Model No. HTS8000S/HTS8010S Serial NoLanguage Code Contents Troubleshooting Locking/Unlocking the discCleaning discs SetupAccessories supplied General InformationFor SonoWave speakers setting, see System PlacementWhen placing the SonoWave speakers, ensure that Positioning for best effectPlacing the AV subwoofer Placing the main DVD system To adjust the volume level of AV subwoofer, seePlacing the Junction Box To AC power outlet Overall Connection OverviewMounting the main DVD system on the wall Optional SetupUse the supplied screws to secure the bracket onto the wall Mounting the SonoWave speakers on the wall Optional Connections Connecting to a ProgressiveScan TV Antenna terminal Connecting to an analogue Audio/video device DeviceSource indicator Remote Control@ TV VOL + ¡ VOL + £ Numeric KeypadMain Unit ECO Power indicatorDisc slot System display panel Using the remote control to operate the system Preparing the remote controlSwitching on the DVD system Switching to Eco Power standby modeSetting the TV Press Source button until Disc appears on the display panelPress 1 to highlight Select Progressive On , then press OK to confirmBelow menu will appear on the TV If no pictureSelecting the matching colour Setting the TV Display SystemOn-screen display OSD language Disc mode, press Setup Menu Press 2 to select General SetupRepeat steps 3~4 for other settings Use 34 keys to select a language and press OK to confirmYour DVD home theatre system will play Disc OperationsPlayable discs Region CodesPlaying a disc Auto Eco Power standby modeBasic playback controls To access or remove the menu Using the Disc MenuTo select a playback feature or item Selecting various repeat/ shuffle functionsResuming playback from the last stopped point To cancel the resume modeViewing playback information ZoomingFor VCD changing the audio channel For VCDs with Playback Control PBC feature version 2.0 onlyChanging sound track language Changing subtitle language DVD onlyDisc menu appears on the TV screen Playing an MP3/JPEG/MPEG-4 discPlaying MP3 music and Jpeg picture simultaneously Zoom picture Playing a picture disc slide showPreview Function Rotating/Flipping the picturePlaying a Super Audio CD Sacd Playing a DivX discProgramming disc tracks not for Picture CD/MP3/SACD DVD Setup Menu OptionsAccessing General Setup Locking/Unlocking the disc for viewingOSD Language DivX VOD registration codeScreen Saver turning on/off Setting the analogue output Accessing Audio SetupNight Mode turning on/off CD UpsamplingProgressive function turning on/off Accessing Video SetupTV Type TV DisplayPicture Setting Setting the Video OutputAudio, Subtitle, Disc Menu Accessing Preference SetupRestricting playback by Parental Control MP3/JPEG Menu turning on/off Rating explanationsPBC Playback Control Without MenuRestoring to original settings Changing the Password Setting the DivX Subtitle fontOthers Using the Plug and Play Tuning to radio stationsPresetting radio stations For first time setup, press Source to select Tuner modeAutomatic presetting Selecting a preset radio stationDeleting a preset radio station All your former presets will be overriddenSound and Volume Controls Speakers SonoWave adjustmentTo turn off the volume temporarily AV subwoofer adjustmentVolume control Selecting surround soundOther Functions Setting the Sleep timerUsing the remote to operate your ‘Philips’ television Dimming system’s displaySpecifications Amplifier SectionProblem TroubleshootingSolution DVD system does not start playback Glossary Glossary