Philips HTS8010S/01B user manual Varoitus

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or coloured black.

Connect the brown wire to the terminal marked L or coloured red.

Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

2

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio HTS8000S, HTS8010S, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven,The Netherlands

Norge

Typeskilt finnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

VAROITUS

Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten muutto saattaa altistaa vaaralliselle säteilylle tai muille vaarallisille toiminnoille.

001-049 HTS8000S-00-eng2

2

3139 115 2xxx1

28/06/2005, 02:09 PM

Image 2
Contents Need help fast? Varoitus Español IndexEnglish 138For Customer Use Model No. HTS8000S/HTS8010S Serial NoLanguage Code Contents Troubleshooting Locking/Unlocking the discCleaning discs SetupAccessories supplied General InformationFor SonoWave speakers setting, see System PlacementWhen placing the SonoWave speakers, ensure that Positioning for best effectPlacing the Junction Box To adjust the volume level of AV subwoofer, seePlacing the AV subwoofer Placing the main DVD system To AC power outlet Overall Connection OverviewUse the supplied screws to secure the bracket onto the wall Optional SetupMounting the main DVD system on the wall Mounting the SonoWave speakers on the wall Scan TV Antenna terminal Connecting to a ProgressiveOptional Connections Connecting to an analogue Audio/video device Device@ TV VOL + Remote ControlSource indicator ¡ VOL + £ Numeric KeypadDisc slot System display panel ECO Power indicatorMain Unit Using the remote control to operate the system Preparing the remote controlSwitching on the DVD system Switching to Eco Power standby modeSetting the TV Press Source button until Disc appears on the display panelPress 1 to highlight Select Progressive On , then press OK to confirmBelow menu will appear on the TV If no pictureSelecting the matching colour Setting the TV Display SystemOn-screen display OSD language Disc mode, press Setup Menu Press 2 to select General SetupRepeat steps 3~4 for other settings Use 34 keys to select a language and press OK to confirmYour DVD home theatre system will play Disc OperationsPlayable discs Region CodesBasic playback controls Auto Eco Power standby modePlaying a disc To access or remove the menu Using the Disc MenuTo select a playback feature or item Selecting various repeat/ shuffle functionsResuming playback from the last stopped point To cancel the resume modeViewing playback information ZoomingFor VCD changing the audio channel For VCDs with Playback Control PBC feature version 2.0 onlyChanging sound track language Changing subtitle language DVD onlyPlaying MP3 music and Jpeg picture simultaneously Playing an MP3/JPEG/MPEG-4 discDisc menu appears on the TV screen Zoom picture Playing a picture disc slide showPreview Function Rotating/Flipping the picturePlaying a Super Audio CD Sacd Playing a DivX discProgramming disc tracks not for Picture CD/MP3/SACD DVD Setup Menu OptionsAccessing General Setup Locking/Unlocking the disc for viewingScreen Saver turning on/off DivX VOD registration codeOSD Language Setting the analogue output Accessing Audio SetupNight Mode turning on/off CD UpsamplingProgressive function turning on/off Accessing Video SetupTV Type TV DisplayPicture Setting Setting the Video OutputRestricting playback by Parental Control Accessing Preference SetupAudio, Subtitle, Disc Menu MP3/JPEG Menu turning on/off Rating explanationsPBC Playback Control Without MenuOthers Changing the Password Setting the DivX Subtitle fontRestoring to original settings Using the Plug and Play Tuning to radio stationsPresetting radio stations For first time setup, press Source to select Tuner modeAutomatic presetting Selecting a preset radio stationDeleting a preset radio station All your former presets will be overriddenSound and Volume Controls Speakers SonoWave adjustmentTo turn off the volume temporarily AV subwoofer adjustmentVolume control Selecting surround soundOther Functions Setting the Sleep timerUsing the remote to operate your ‘Philips’ television Dimming system’s displaySpecifications Amplifier SectionSolution TroubleshootingProblem DVD system does not start playback Glossary Glossary