Basic Connections (continued)
English
Main Unit | Main Unit |
(rear) | (rear) |
AUX 1 |
|
Step 4: Connecting the FM antenna
A Connect the supplied FM antenna to the FM 75 Ω socket. (For some models, the FM antenna has been connected in the factory.) Extend the FM antenna and fi x its ends to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Helpful Hints:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far away as possible from your TV, VCR or other radiation source to prevent any unwanted interference.
Step 5: Connecting the power cord
Notes:
–For power supply rating, refer to the rear or bottom of the main unit.
–Turning off to standby mode does not disconnect the unit from mains.
A When all the connections are complete, set the voltage selector to the local power line voltage.
B Connect the AC power cord to the power outlet.
The standby LED on the main unit lights up.
Helpful Hint:
–Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
17