Radio Operations
Before you start .....
Ensure that the FM antenna has been connected to the Home Theatre Unit. (For some models, the FM antenna has been connected in the factory).
A Connect the FM antenna (supplied) to the FM socket.
B Attach the other end of the FM antenna to a wall.
Tuning to radio stations
A Press SOURCE repeatedly until ‘FM’ appears on the display panel (or press RADIO on the remote control.)
B Press / on the remote control to start tuning.
The frequency indication starts to change until a radio station with suffi cient signal strength is found.
C Repeat step B if necessary until you fi nd the desired radio station.
D To fi
English
AUX 2 | AUX 1 |
Helpful Hints:
–For better FM stereo reception, connect an external FM antenna (not supplied).
–Position the antenna as far away as possible from your TV, VCR or other radiation source to prevent any unwanted interference.
Changing tuning grid
(only applicable for certain regions) In some countries, the frequency step between adjacent channels in the FM Band is 50 kHz (100 kHz in some areas).
Note:
Changing the tuning grid erases all previously stored preset radio stations.
A Press SOURCE repeatedly until ‘FM’ appears.
B Press x.
C Press and hold u until ‘GRID 9’ or ‘GRID 10’ appears.
47