Philips HTS3565/78 manual Presetting radio stations, Using auto install, Using automatic preset

Radio Operations (continued)

English

Presetting radio stations

You can store up to 40 FM preset radio stations in the memory. There are three different ways to program the radio stations:

–Using auto install (for fi rst time setup only)

–Using automatic preset

–Using manual preset

Helpful Hints:

–This unit exits presetting mode if no button is pressed within 20 seconds.

–If no stereo signal is detected or less than

5 (fi ve) stations are detected during radio installation, ‘CHECK ANTENNA’ appears.

Using auto install

When you access the ‘RADIO’ mode for the very fi rst time, you will be prompted to install the radio stations. With this feature, you can install all the available radio station automatically with one touch of button.

RADIO

A Press RADIO.

‘AUTO INSTALL ... PRESS PLAY’ appears.

B Press u.

All the available radio stations with

strong signal will be stored automatically. Once complete, the fi rst tuned radio

station will be played back.

Using automatic preset

Use automatic presetting to store or reinstall all the preset radio stations.

RADIO

A Press RADIO to select ‘FM’ band.

B Press and hold REPEAT (PROGRAM) until ‘START ...’ appears on the display panel.

All previously stored radio stations will be replaced.

Using manual preset

Use manual presetting to store your favorite radio stations.

A Tune to your desired radio station (see ‘Tuning to radio stations’).

B Press REPEAT (PROGRAM).

C Press í / ë or use the numeric keypad 0-9to select a preset number that you want to store the current radio station.

D Press REPEAT (PROGRAM) to store.

48