E n
Installation
Power supply | Before using the remote control |
g l i s h
–The type plate is located on the bottom panel.
–Make sure all connections have been made before connecting the power adapter to the wall outlet.
1
2
1Insert the DC plug of the supplied power adapter to the DC 12V socket on the back panel.
2Plug the AC plug of the power adapter to the wall outlet.
CAUTION!
– To avoid the hanging power supply cord from touching other heating or cooking apparatus to cause danger, please use the fixer to fasten the cord on the wall or route it away from other appliances when installing the unit.
1Pull out the plastic protective sheet.
2Select the source you wish to control by pressing one of the source select keys on the remote control (for example DISC,TUNER).
3Then select the desired function (for example
É, í, ë).
Replacing battery (lithium CR2025) into the remote control
1Push to open the battery tray.
2Replace a new battery according to the indicated polarity.
3Push the battery tray back to close it.
CAUTION!
–Remove battery if it is exhausted or will not be used for a long time.
–Battery contains chemical substances, so they should be disposed of properly.
–Perchlorate
12