TV
Watching TV
The set can receive both Digital TV (DTV) and Analog TV (ATV).
1Check your TV set has been properly connected and placed. (see Installation, Connecting TV antenna/CATV and Using the TV Screen)
2Press DTV / ATV on the remmote control to
select DTV ( Digital TV ) or ATV (Analog TV) (or SOURCE on the set).
●Pressing SOURCE can select either digital TV or analog TV only, depending on the last selected TV source.
3To receive cable channel, select HRC, IRC or STD through the TV Menu Operation on the next page (See “Setting up TV”).
4The first time you use the TV, press and hold PROG until the auto scann progress bar (digital TV or analog TV) appears.
➜Available channels (DTV or ATV) are programmed,
➜After all channels are stored, the first autostore channel will then automatically play.
5Press PRESET / CHANNEL 3 4 to select your desired channel (on the remote control, O P CH )
or
Use the Numeric Keypad
Channel 2: Press 0 and then, 2 Channel 10, Press 1 and then, 0
● For Digital TV, you also need to press /GOTO on the remote control to enable
Helpful hints:
–To receive the cable channels, you must connect your TV to the cable TV outlet using a CATV cable (not supplied), and program your TV by select TV source (HRC, IRC or STD) in the TV menu according to your region.
Using EPG (Electronic Program Guide) - Digital TV only
In Digital TV, you can access EPG content which may include program availability, backgroud information, etc..
1In Digital TV, press EPG on the remote control to turn on EPG information.
2 If necessary, use 3 / 4 / à / áand OK on the remote control to select and confirm your selection.
3To turn off EPG, press EPG again.
Turning on/off TV caption
●Press CC / SUBTITLE once or more to turn on or off TV caption (if available), or display various caption displaying effects.
Selecting audio language (Digital TV only)
●Press AUDIO on the remote control to select language spoken on the TV (if available).
Using ERASE/WRITE button on the remote control
To skip a stored channel
1Selelect the channel you want to skip.
2Press once ERASE/ WRITE on the remote control.
➜The current channel number appears in red.
●The channel will skip when using 3 or 4 to select a TV channel.
To restore a skipped channel to be selectable
1Use the Numeric Keypad
2Press ERASE/ WRITE on the remote control. ➜The skipped channel will be selectableusing 3 or 4.
To store a new channel (Analog TV only)
1When a new analog channel is found, use the Numeric Keypad
2Press ERASE/ WRITE on the remote control. ● The new channel will be stored.
English
19