Philips REM400 setup guide FC2, CBL Power

OPERATING YOUR REMOTE CONTROL

FC1 And FC2 Keys

Programming A Favorite Channel (cont.)

1.	On the remote control, press and
	hold SET until the red light blinks
	twice,then release SET.
2.	Enter 9-9-5. The red light will
	blink twice.
3.	Press and release either FC1 or
	FC2.
4.	On the remote con-
	trol, press TV, VCR,
	CBL, or DSS once.
5.	Enter 7-1.
	NOTE: If you have access to over
	100 channels, enter in 071.
6.	Press and hold SET until the red
	light blinks twice, then release
	SET.

Programming A Secondary MCP Key With Instant Channel Selection

Just like the MCP key, the FC1 and FC2 keys can be programmed to turn on and off your equipment. For instance, let’s say you want your child to be able to easily turn on the equipment and select their favorite channel.

You can setup a sequence on the FC1 or FC2 key to turn on the TV and cable box, and then tune the cable box to a specific channel (e.g., 11) with the push of one key.

1. On the remote control, press and hold SET until the red light blinks twice,then release SET.

2. Enter 9-9-5. The red light will blink twice.

3. Press and release either FC1 or

FC2.

4. Enter the following sequence:

CBL,

POWER,

TV,

POWER,

CBL, and

1-1(or 0-1-1if you have access to over 100 channels)

5. Press and hold SET until the red light blinks twice, then release SET.

Now when you press the programmed FC key, the Cable box and TV will turn on and the Cable box will tune to channel 11.

10