About Batteries, Using the Lighted Keypad

ABOUT BATTERIES

NOTE: The DSS requires four (4) new “AAA” alkaline batteries (not supplied). Do not mix old and new batteries or mix alkaline with manganese-type batteries.

4.Test the unit by pressing POWER and any Component key (e.g., TV, VCR, CBL, etc.). If the batteries are inserted correctly, the red indicator light will blink once.

Installing Batteries

Battery Saver

1.On the back of the remote control, push the tab and lift the battery compartment cover off.

2.Match the + and – marks on the batteries to the + and – marks in the battery case and insert four (4)“AAA”alkaline batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

The DSS has a Time-Outfeature that will automatically deactivate the remote control if a key is depressed for more than 30 seconds. This feature will help conserve the battery life should your remote control get stuck in a place where keys remain depressed (e.g., between the sofa cushions).

Replacement And Code Saver

When the batteries need replacing, the DSS remote control will stop working and will require four (4) new“AAA”alkaline batteries for continued operation. Simply replace the batteries,and the DSS remote control will be restored to its full functionality, complete with your favorite settings.

All of the codes and programmed informa- tion will be stored,ensuring that you will not have to reprogram the DSS remote control.

USING THE LIGHTED KEYPAD

When activated,the DSS remote control fea-		2.	To turn off the keypad back light,
tures a lighted keypad that illuminates all of			press LIGHT once again.(The key-
the remote control keys whenever you press			pad will not light whenever you
any key.			press any key.)
1.	To turn on the keypad back light,
	press LIGHT once.The keypad will

remain lit for 5 seconds after you release any key.