About Batteries, Using the Lighted Keypad

ABOUT BATTERIES

NOTE: The I-TV requires four (4) new “AAA” alkaline batteries (not supplied). Do not mix old and new batteries or mix alkaline with manganese-type batteries.

4.Test the unit by pressing POWER and any Component key (e.g., TV, VCR, CBL, etc.). If the batteries are inserted correctly, the red indicator light will blink once.

Installing Batteries

Battery Saver

1.On the back of the remote control, push the tab and lift the battery compartment cover off.

2.Match the + and – marks on the batteries to the + and – marks in the battery case and insert four (4)“AAA”alkaline batteries.

3.Press the battery cover back into place. The tab should click when the cover is locked.

The I-TV has a Time-Outfeature that will automatically deactivate the remote control if a key is depressed for more than 30 seconds. This feature will help conserve the battery life should your remote control get stuck in a place where keys remain depressed (e.g., between the sofa cushions).

Replacement And Code Saver

When the batteries need replacing, the I-TV remote control will stop working and will require four (4) new“AAA”alkaline batteries for continued operation. Once you remove the old batteries, program settings and codes will be saved for 10 minutes, allowing adequate time to insert new ones.

However, if you do not replace the batteries within the allotted time (i.e., 10 minutes), you will have to reprogram the I-TV remote control (see next page).

USING THE LIGHTED KEYPAD

When	activated, the I-TV remote control	2.	To turn off the keypad back light,
features a lighted keypad that illuminates all			press LIGHT once again.(The key-
of the remote control keys whenever you			pad will not light whenever you
press any key.			press any key.)
1.	To turn on the keypad back light,
	press LIGHT once.The keypad will

remain lit for 5 seconds after you release any key.