Setting UP Your Remote Control, Key Charts

KEYS AND FUNCTIONS (continued)

Key Charts

1Red Indicator Light

The Red Indicator Light blinks to show that the remote control is working and also provides feedback during program- ming sequences.

2Component Keys

Press TV, VCR, CBL, AUD, DSS,or CD once to select a home entertainment compo- nent to control.

3CH Keys

Use CH + (or CH -) to select the next higher (or lower) channel for the selected home entertainment component.

4VOL Keys

Use VOL + (or VOL -) to raise (or lower) the sound volume.

5I-TV Key

Press I-TVto access the On-Screen Menu for your home entertainment compo- nents (see page 8).

6EXIT Key

Use EXIT to exit out of the selected com- ponent’s menu or guide.

7SELECT Key

Use SELECT to choose options from your selected component’s menu or guide.

8GUIDE Key

Use GUIDE to display the programming guide for your components (if applicable).

9MUTE Key

Press MUTE once to turn sound off or on.

0LAST Key

Press LAST once to recall the last channel and to page back one screen in the main menu.

qSLEEP Key

Press SLEEP to activate your TV’s internal sleep timer. (Not available for all TVs.)

wLIGHT Key

Press LIGHT once to turn on or off the keypad back light.

ePOWER Key

Press POWER once to turn on or off the selected home entertainment component.

rKeypad

Use the keypad (0 ~ 9) to directly enter in channels (for example, 09 or 31). The keypad is also used for all programming sequences,such as entering in your pro- gramming codes.

tSCAN Key

Press SCAN once to change channels every 3 seconds. Press it again to stop the scan.

yENTER Key

Press ENTER once after entering channel numbers on some TV models.

uVCR Transport Keys

Use the VCR Transport Keys to control your VCR, as well as CD or DVD player. Press REC twice to record a tape.

iFC1 and FC2 Keys

User-programmable Favorite Command Keys (see page 9 for details).

oMCP Key

Multiple-component On/Off Key (see page 8 for details).

pTV/VCR Key

Press TV/VCR once to view VCR playback or TV through the VCR.

aSET Key

Use SET for all programming sequences.

SETTING UP YOUR REMOTE CONTROL

Before using your new I-TV remote control, you will need to obtain and install new bat- teries, as described on the next page.

Then you’ll also need to program the I-TV remote control with the correct code num- bers for your specific components. See instructions starting on page 5.