The I-TV Universal Remote Control is designed to be an enhanced replacement for your original remote control.Although most keys operate the same (see Key Charts on page 3), some do differ or provide unique features as described below.
I-TV Key
The I-TVkey works just like the MENU key of your original remote control and allows you to access the on-screen menu of the compo- nent you have selected (e.g., TV, VCR, DVD, LD, CBL,or DSS).
Moreover,while in the I-TV mode,the VOL+, VOL–, CH+, and CH – keys* will allow you to navigate and adjust the on screen menu set- tings just like you would with your original remote control.
To exit out of I-TV mode, either press I-TVagain or EXIT (depending on how the origi- nal remote control functioned) to return to normal operation.
*NOTE: If your component’s On-Screen menu requires the use of the Volume and Channel keys to navigate and change the On-Screen menu settings, press I-TVagain while the On- Screen menu is displayed.
GUIDE Key
The GUIDE key works just like the GUIDE key of your original remote control and allows you to access the On-Screen guide* of the component you have selected (e.g. CBL,DSS, and some newer TVs).
While in the Guide mode, the VOL+, VOL–, CH+, and CH – keys* will allow you to navi- gate Up, Down, Left and Right just like you would with your original remote control.
To exit out of the Guide mode, either press GUIDE key again or EXIT (depending on how the original remote control functioned) to return to normal operation.
NOTE: *On-Screen guide is an interactive channel listings menu that is available on most DSS Satellite systems and is also used with advanced converters being offered by some cable systems. This feature is not applic- able for all DSS or cable boxes.
SELECT Key
The SELECT key allows you to choose features displayed on your On-Screen menu while in the I-TV mode, and programs while in the GUIDE mode.
If your original remote control includes a SELECT key, then the I-TV’s SELECT key will operate in the same manner for the selected component.
SCAN Key
The SCAN key allows the remote control to scan the TV, VCR, CBL and DSS channels. When activated, the remote control will change channels every 3 seconds.
1. | On the remote con- |
| trol, press TV, VCR, |
| CBL, or DSS once. |
2. | Press SCAN once. Scanning will |
| start with the current channel, |
| then proceed to the next channel |
| up, and continue until all chan- |
| nels of your TV,VCR,CBL or DSS |
| component are scanned. |
3. | To stop scanning channels,press |
| SCAN (or any key). |
MCP Key
The I-TV remote control includes a multi- component power (MCP) key that can be programmed for master power on/off con- trol of components using a single key.
To Program The MCP Key:
1. | On the remote control, press and |
| hold SET until the red light blinks |
| twice,then release SET. |
2. | Enter 9-9-5. The red light will |
| blink twice. |
3. | Press MCP once. |
4. | Press a Component |
| key once (e.g., TV, |
| VCR, CBL, AUD, DSS, |
| or CD). |
5.
Press POWER.
6.Repeat steps 4 and 5 one or more times for each component you want under master power on/off control.
7. 
Press and hold SET until the red light blinks twice, then release SET.
