Krell Industries FBI manual Remote Control Only, Battery Installation and Removal

Remote Control Only

See Figure 2 on page 12

Battery Installation and Removal

Notes

The remote control uses 2 AAA-size 1.5 Volt batteries. Batteries are included with the shipment. To install the batteries:

1.Remove the remote control backplate, using the supplied T-10 Torx wrench.

2.Install the batteries, following the battery position diagram on the plastic battery receptacle.

3.Replace and secure the backplate.

Replace batteries when remote control function becomes intermittent.

Remove batteries if the remote control is not used for a long period of time. Battery leakage can damage the remote control.

Krell FBI 15