Krell Industries FBI Front Panel/Remote Control Description, Power Button or Key, Power Indicator

Front Panel/Remote Control Description

See Figures 1 and 2 on page 12

	Power, analog input selections, and volume control accessed via
	the FBI front panel buttons or remote control keys are described
	below. The front panel display shows volume and balance levels,
	and Theater Throughput status. Most front panel functions also are
	activated via the keys on the remote. The volume adjustment func-
	tion, a special operational feature of the remote control only, is
	described on page 16:
POWER	1 Power Button or Key
	Use this button or key to switch the FBI between the stand-by
	and the operational modes.
	2 Power Indicator
	The blue power indicator illuminates when the FBI is in the opera-
	tional mode. The blue power indicator also flashes when any
	remote control key is pressed.
	3 Stand-by LED
	The amplifier is in the stand-by mode and ready to be switched to
	the operational mode, when the FBI is plugged into a standard
	AC wall receptacle, the back panel power breaker switch (24) is in
	the up position, and the red stand-by LED illuminates.
	4 Infrared Sensor
	The infrared sensor receives commands from the FBI remote con-
	trol. For proper remote control operation, make sure that nothing
	is obstructing the infrared sensor.
ANALOG	5 C-1 Button, Key, and LED
SOURCE	Selects a CAST source component (C-1) via a CAST connector.
COMPONENTS	When the button or key is selected, the red LED illuminates.
	6 B-1 Button, Key, and LED
	Selects a balanced analog source component via an XLR connec-
	tor. When the button or key is selected, the red LED illuminates.
	7 S-1, S-2, and S-3 Buttons, Keys, and LEDs
	Selects a single-ended analog source component via single-
	ended RCA connectors. When the button or key is selected, the
	red LED illuminates.

Krell FBI 13