Krell Industries FBI manual Back Panel Description, Left and Right Loudspeaker Outputs

Back Panel Description

See Figure 3 on page 17

AMPLIFIER CHANNEL OUTPUTS

ANALOG INPUTS

ANALOG OUTPUTS

The FBI back panel provides connections for all inputs and out- puts, power on/off, and additional remote connections.

15 Left and Right Loudspeaker Outputs

Two pairs of loudspeaker binding posts are available for each channel of amplification, facilitating a power-bi-wire connection to the loudspeaker. Each pair of binding posts is connected internal- ly via copper buss bars. When only one set of binding posts is used, the connection can be made from either pair of binding posts. See the loudspeaker and/or cable manufacture’s instruc- tion manual for more information about power-bi-wire connec- tions.

The loudspeaker binding posts accept spade lugs only. Bare wire, banana lugs, or pins will not work. Use the red terminal for the positive connection and the blue terminal for the negative con- nection.

16 Krell CAST Inputs

The FBI is equipped with one pair of Krell CAST inputs via 4-pin bayonet connectors. Krell CAST inputs allow the Fully Balanced Integrated amplifier to be connected to any Krell CAST-equipped component.

17 Left and Right Balanced Analog Inputs

The FBI is equipped with one pair of balanced (B-1) inputs via XLR connectors.

18 Left and Right Single-Ended Analog Inputs

The FBI is equipped with three pairs of single-ended (S-1, S-2, or S-3) inputs via RCA connectors.

19 Left and Right Tape Inputs

The FBI is equipped with a pair of single-ended tape inputs via RCA connectors.

20 Left and Right Tape Outputs

The FBI is equipped with a pair of single-ended tape outputs via RCA connectors.

21 Left and Right Preamp Outputs

The FBI is equipped with a pair of single-ended pre- amplifier outputs.

18 Krell FBI