Kodak DCS 465 user manual Installing a Scsi Host Adapter, For Qualified Technical Personnel Only

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing a SCSI Host Adapter

The DCS 465 Camera Back connects to your PC at a SCSI port provided by installing one of the supported SCSI host adapter cards described in chapter 1. If your PC already has a supported card installed, continue at the next section, “Making the SCSI Connection.” Otherwise continue below.

CAUTION: Only trained and qualified technical personnel should perform the following procedure. You should contact a computer service professional to configure and install an ASPI host adapter card such as those available from Adaptec, Inc. running EZ-SCSI 3.0 or later or a Future Domain SCSI Host Adapter card. Customers with laptop comput- ers can use a PCMCIA-to-SCSI adapter (such as the New Media Bus Toaster), as described later in this chapter. The installer should read all manufacturers’ instructions for both the computer and the host adapter before installing the adapter in your computer.

For Qualified Technical Personnel Only

1.Turn off the power to the computer and all peripherals (turn off the computer first).

2.If the termination power setting on your SCSI host adapter is disabled, change its setting to enable it.

 Preparing for Use with PC G 5-17